Welding Blanket Rolls
Welding blanket material on the roll, so you can cut exactly the sizes you need. Fiberglass, vermiculite and acrylic-coated rolls in widths up to 60 inches, for shops, fabrication lines and contractors covering large areas.
Special Offers
-
Vendor: Black Stallion
7 oz FR 88/12 Work Shirt (NFPA 2112 / 70E), Stone
Regular price From $60.99 -
Vendor: Black Stallion
BSX Men's Work Shirt (NFPA 2112 / 70E), Black
Regular price From $64.99 -
Vendor: Black Stallion
AngelFire Women's Work Shirt (NFPA 2112 / 70E), Black
Regular price From $52.99 -
Vendor: Black Stallion
7 oz FR Cotton Work Shirt With Reflective (NFPA 2112 / 70E), Stone
Regular price From $75.99
-
Vendor: Black Stallion
24 oz Neoprene Jacketed Fiberglass Welding Blanket Material, 60" Wide Roll, Gold
Regular price $17.99 -
Vendor: Black Stallion
24 oz Neoprene Jacketed Fiberglass Welding Blanket Material, 40" Wide Roll, Gold
Regular price $11.99 -
Vendor: Black Stallion
16 oz Carbon Fiber Welding Blanket Material, 72" Wide Roll, Black
Regular price $61.99
Buying guide
Buying blanket material by the roll
Rolls make sense when you need custom sizes or a lot of coverage.
Width
Choose a width close to the size you need most so you make fewer cuts. Common widths include 36, 40 and 60 inches.
Weight and coating
Heavier rolls and vermiculite coatings handle more heat and slag. Lighter rolls are easier to drape and fold.
Cutting
Use sharp shears or a utility knife. Coated material frays less at the edges than plain fiberglass.
Storage
Keep rolls dry and off the floor. Moisture and crushing shorten the life of the material.
Compare
Roll materials
General guidance. Each listing shows its weight, width and intended use.
| Type | Good for | Notes |
|---|---|---|
| Plain fiberglass | Light to moderate spatter | Affordable, but loose fibers can itch |
| Acrylic coated | Moderate spatter, horizontal and vertical | Coating locks in fibers and adds abrasion resistance |
| Vermiculite coated | Heavier spatter and slag, higher heat | Mineral coating raises heat resistance |
| Neoprene coated | Spatter with abrasion | Coating adds durability and resists liquids |
Good to know
When a roll beats pre-cut
If you're covering a large floor area, lining a booth or making equipment covers, a roll is usually more efficient than several pre-cut blankets.
For quick, standard coverage around a single station, pre-cut blankets are faster to put to work.
Cut exactly what the job needs.
FAQ
Blanket roll questions
How long is a blanket roll?
Roll length varies by product. Check each listing for the exact length and width.
Can I cut a vermiculite blanket roll?
Yes. Use sharp shears or a knife and wear gloves and long sleeves when cutting.
Do the edges need to be finished?
For most uses, no. If edges fray with heavy handling, you can fold them over or use metal grommets to reinforce them.
Which roll is best for floors?
For floors and falling slag, heavier rolls with a vermiculite coating are a common choice.
Need help figuring out how much material to order?
Tell us the job and we'll point you to the right gear. Real answers from people who know welding PPE.