Industrial & Cotton Gloves
The everyday gloves that keep a shop running. Coated knits for grip, cut-resistant HPPE blends, cotton and canvas styles and synthetic leather palms, for assembly, material handling, warehouse work and general maintenance.
Special Offers
-
Vendor: Black Stallion
7 oz FR 88/12 Work Shirt (NFPA 2112 / 70E), Stone
Regular price From $60.99 -
Vendor: Black Stallion
BSX Men's Work Shirt (NFPA 2112 / 70E), Black
Regular price From $64.99 -
Vendor: Black Stallion
AngelFire Women's Work Shirt (NFPA 2112 / 70E), Black
Regular price From $52.99 -
Vendor: Black Stallion
7 oz FR Cotton Work Shirt With Reflective (NFPA 2112 / 70E), Stone
Regular price From $75.99
-
Vendor: Black Stallion
A9 Cut Resistant Sandy Nitrile Coated 18G HPPE Blend Glove
Regular price $20.99 -
Vendor: Black Stallion
A6 Cut Resistant and Impact Sandy Nitrile Coated 18G HPPE Blend Glove
Regular price $16.99 -
Vendor: Black Stallion
A6 Cut Resistant Sandy Nitrile Coated 18G HPPE Blend Glove
Regular price $9.60 -
Vendor: Black Stallion
AccuFlex™ A6 Cut & Impact Resistant Hi-Vis Nitrile-Coated Knit Glove
Regular price $18.99 -
Vendor: Black Stallion
A6 Cut Resistant Sandy Nitrile Coated 13G Hi-Vis HPPE Blend Glove
Regular price $11.80 -
Vendor: Black Stallion
A5 Cut Resistant Thermal Sandy Nitrile Coated 15G Hi-Vis HPPE Blend Glove
Regular price $11.99 -
Vendor: Black Stallion
A6 Cut-Resistant Thermal Double Latex Coated Terry-Lined 15G HPPE Knit Glove
Regular price $9.80 -
Vendor: Black Stallion
AccuFlex™ A5 Cut Resistant Sandy Nitrile Coated Glove
Regular price $8.99 -
Vendor: Black Stallion
AccuFlex™ A4 Cut-Resistant PU-Coated Knit Glove
Regular price $6.40 -
Vendor: Black Stallion
AccuFlex™ A4 Cut-Resistant Nitrile-Foam Knit Glove
Regular price $7.99 -
Vendor: Black Stallion
10G Acrylic 3/4 Crinkle Latex Coated Gloves
Regular price $5.50 -
Vendor: Black Stallion
13G Polyester PU Coated Gloves
Regular price $1.60
Buying guide
Picking a general work glove
Most industrial gloves come down to three choices: coating, knit and cut level.
Coating
Sandy nitrile gives grip on oily parts. Double latex is grippy and flexible in dry work. Uncoated cotton is breathable for light handling.
Knit gauge
A 13G knit is thicker and tougher. 15G and 18G knits are thinner and more dexterous for small parts.
Cut level
If you handle sheet metal or sharp parts, choose a glove with an ANSI cut rating. HPPE blends reach high levels without bulk.
Hi-vis options
Hi-vis shells make hands easier to see around moving equipment, which helps with hand signals.
Good to know
Why coated gloves are so popular
A coated knit glove gives you a thin, flexible shell with grip only where you need it, on the palm and fingers. The back stays uncoated, so your hand can breathe.
They're also easy to stock by the dozen, which makes them a common pick for warehouses, assembly lines and maintenance crews.
Grip, feel and protection for the everyday work.
FAQ
Work glove questions
Which coating is best for oily parts?
Sandy or foam nitrile coatings are a common choice for oily or wet handling because the textured surface helps grip.
Are these gloves good for welding?
No. Knit and coated gloves aren't made for welding heat or spatter. Use a leather welding glove near the arc.
Can I buy these by the dozen?
Yes. Many shops buy work gloves in bulk. Reach out through our Bulk Orders page for case quantities.
Do coated gloves come in smaller sizes?
Many styles run from XS or S up to 2XL. Each listing shows its size range.
Stocking gloves for a whole shop?
Tell us the job and we'll point you to the right gear. Real answers from people who know welding PPE.