Cut-Resistant Gloves A4 to A9
Higher cut ratings for higher-risk work. Every glove here is rated ANSI A4 or above, up to A9, in knit, coated, leather and impact styles, so you can handle sharp sheet, stamped parts and fresh-cut stock with more confidence.
Special Offers
-
Vendor: Black Stallion
7 oz FR 88/12 Work Shirt (NFPA 2112 / 70E), Stone
Regular price From $60.99 -
Vendor: Black Stallion
BSX Men's Work Shirt (NFPA 2112 / 70E), Black
Regular price From $64.99 -
Vendor: Black Stallion
AngelFire Women's Work Shirt (NFPA 2112 / 70E), Black
Regular price From $52.99 -
Vendor: Black Stallion
7 oz FR Cotton Work Shirt With Reflective (NFPA 2112 / 70E), Stone
Regular price From $75.99
Buying guide
Getting the most from a high cut level
A high rating only helps if the glove fits the work. These are the tradeoffs to think about.
Level vs feel
Each step up in cut level usually adds some thickness. Pick the lowest level that covers your hazard so you keep as much feel as possible.
Coated or leather
Coated knits are light and grippy. Leather palms like goatskin add durability and a better feel for tools.
Impact backs
TPR pads on the back of the hand protect knuckles and fingers from pinch points and dropped parts.
Winter versions
Some styles add a thermal liner so you keep your cut rating on cold jobsites.
Reference
Where A4 to A9 fits
General guidance only. Your site's hazard assessment sets the requirement.
| Level | Grams to cut | Typical work |
|---|---|---|
| A4-A5 | 1,500 to 2,999 g | Sheet metal, HVAC, glass and general fabrication |
| A6-A7 | 3,000 to 4,999 g | Stamping, metal recycling, sharp-edged parts |
| A8-A9 | 5,000 g and up | Heavy sheet, sharp blades, the highest cut risk |
Good to know
How the cut test works
ANSI/ISEA 105 cut levels come from a lab test where a straight blade is drawn across the glove material under increasing weight. The rating reflects the grams of force it takes to cut through.
It's a slicing test. Punctures from needles or wire and cuts from serrated blades are separate hazards and may need other protection.
A higher number means more force to cut through.
FAQ
High cut level questions
Is A9 always the right pick?
Not necessarily. Higher levels tend to be thicker and cost more. If an A5 or A6 covers your hazard, you'll often get better dexterity from it.
Do high cut gloves protect against punctures?
Cut ratings don't measure puncture resistance. If punctures are a risk, check the listing for a separate puncture rating.
Are there winter gloves with high cut levels?
Yes. Some styles add a thermal or terry liner and keep an A4 to A7 rating.
What does 18G mean on a cut glove?
It's the knit gauge. A higher number means a finer, thinner knit that's more flexible. Lower numbers like 13G are thicker.
Matching a cut level to a specific job?
Tell us the job and we'll point you to the right gear. Real answers from people who know welding PPE.